How to Replace a Kia Sportage Replacement Key
The key of a lot of Kia models has an electronic keyless entry system built into. This key is similar to the remote control and can be exchanged by a Kia dealer.
Key fobs can stop working due to a variety of reasons, including the battery being dead, worn-out buttons, signal interference or water damage. Here are some helpful tips on how you can get your Kia Sportage replacement key to function again.
How to replace the remote key or the smart key?
No matter if your Kia comes with an intelligent key, remote key, push-to-start key, or regular metal non-transponder key, the battery in these keys will eventually need replacement. This is especially when your car displays a message indicating that the remote or smart keys aren't powered.
This is a relatively easy process. In order to replace the key fob battery take the mechanical key from the slit at the back of the key fob. You then need to break the cover. A small screw is located inside the key fob to keep the battery in place. Remove the old battery by removing the screw using the help of a small screwdriver. Then insert the new one and close the hole in the key fob.
When the key fob is equipped with an updated battery, test it by pressing the locks and unlock buttons. It's good when the doors lock or unlock as you expect. You can now make use of the hands-free lock/unlock feature on your Kia whenever your fingers get chilly or you need to make errands in Brandon.
Not all key fobs might need to be programmed (transponder chips or smart keys). This requires a programming machine that is only available to the locksmith who works for the automotive dealer. Other keys (non transponder keys made of steel) are not required for programming. If your key needs to be programmed again, you must be aware of the number stamped on the tag of the key code and record it in a safe place.
How do I replace the battery?
If your Kia key fob isn't responding when you press the lock or unlock button on the fob, it is a sign that the battery should be replaced. A weak battery could cause other issues, such as the check engine light turning on or the engine not running properly. Fortunately replacing www.g28carkeys.co.uk is a simple DIY project that requires only some basic tools.
Before starting the process before beginning the process, ensure that your vehicle is off and that all doors are shut. Find the small metal or plastic piece on the bottom of your key fob and move it until a metal key slips out. Then, you can insert the key into the handle on the door of your driver to unlock your car.
To replace the battery inside the key fob, you must remove the cover on the rear. Use a plastic pry tool to loosen the latch that holds the black negative cable. Remove the old battery, and then place the new battery to ensure its "+" side faces you and the "-" negative side is facing the fob's electrical contacts. Avoid using too much force when pushing the new CR2032 into place to avoid damaging or bending the metal contacts.
After you have installed the new battery and turning the key fob on and off in the ignition until the door locks up. You can then test your Kia's keys fob again to confirm that it's working as intended.
How do you replace a keyless key
Depending on the model of the Kia Sportage, you may have an ordinary key fob or a smart key. The smart key features an embedded mechanical key blade, while the standard keyfob does not. Both key fobs are equipped with a battery that will eventually need to be changed. Fortunately, it's an easy task that only takes about two minutes.
Before you start it is important to make sure that you are on a level surface with enough lighting and that your Kia is turned off. Keep in mind that there are tiny parts inside the fob that could be snagged if not careful.
The first step is to locate the small release button on the backside of the fob. This will either be an oval silver button or a rectangular slot. Once you press this the mechanical key blade will appear and you can then open the key fob.
After the key fob has been open, remove the battery. The new battery is CR-2032, and can be purchased on the internet or at your local auto parts shop. When you are done you should be able to lock and unlock your vehicle with your key fob, even if your engine isn't running!
How do you replace a broken mechanical key
The Kia keyfob is a wonderful convenience which allows us to lock or unlock our car simply by pressing the button. Like any other device that is used, the Kia key fob may have issues. There are ways to fix these problems and keep your key fobs in good working order for many years.
A dead or weak battery is among the most common issues. This can cause the fob to stop working altogether or to work intermittently. If this happens you should replace the battery with a new one.
If this does not resolve the issue, try using a standard flathead screwdriver to push the plastic casing of the fob open. Be careful not to scratch any internal components or scratch the plastic. Once the battery is removed, replace it with a brand new one.
Close and open the door using the mechanical key. (Every kia fob comes with an emergency mechanical key which will fit into the slot). Test the key fob to check that it's functioning correctly. Contact a dealer, or a locksmith to fix the issue if the fob is still not working. To avoid lockouts in the future, ensure you have an emergency key that will work in all of the trunk and door cylinders.